Printed Gazebos

2 x 2
3 x 3
4.5 x 3
6 x 3
No Frame
Canopy Only
Canopy & Walls
No Graphics
Artwork Support
Design Online

Our printed gazebos are ideal for special outdoor events, helping to provide you with shelter from the weather as well as creating a visually effective display space that is easily seen and grabs attention. 

  • Easy to assemble
  • Carry case included
  • Size Options
  • Wall Options 

Custom gazebos are the ideal promotional display tool. Our gazebos are ideal for using for a wide range of external events, making sure your brand stands out and grabs attention.

Our branded gazebos are extremely versatile. They not only show off your branding and promotional messages but also offer shelter from bad weather. We recommend using our gazebos alongside some of our other promotional display products. Our feather flags look impressive when used alongside our gazebos, we even have special brackets to attach your feather flags to your gazebo.

We offer a range of sizes for our printed gazebos, from 2x2 to 3x6. You are also able to choose the number of walls that you need, including both full walls and half walls.




We offer a range of sizes for our printed gazebos, including:

2 x 2
3 x 3
3 x 4.5
3 x 6
We also offer both full walls and half walls.

Branded gazebos are easy to assemble. We recommend two people assemble our gazebos, but it is possible to assemble them with one person. Walls are easily attached, simply velcro each panel to the roof. They are then easily zipped together with other walls and velcro tabs secure them to the legs. All of our gazebos are available with carry bags, making them easy to transport and store. We can also supply pegs for soft ground and leg weights for securing your gazebo on hard ground.

For full assembly instructions please follow the link in the Downloads section on this product page.

Why should I buy a branded gazebo?

Branded gazebos are a great way to show off your promotional messages and branding. They are ideal for external events, helping you stand out from the crowd, whilst also offerring a shelter from the weather. We offer a range of sizes, which you can customised with the specific number of walls that you need, this helps you to create a bespoke gazebo display that suits your display requirements. We produce our printed gazebo walls and roofs in house at our head office in Cambridgeshire, making sure they are produced to the highest quality with fast turnaround times.

Is it possible to remove walls from your printed gazebos?

Yes, our gazebos are fully adaptable allowing you to choose the number of walls that you have on display. All of the walls are easy to attach, simply using Velcro to attach to the roof and legs, and zipping together with other walls. We also offer half walls to allow you to create a fully customisable gazebo display.

Which parts of your pop up gazebo can be printed?

We print the gazebo walls and roof to your bespoke designs. You can choose the number of walls you need.

Can your branded gazebos be fixed to the ground?

Yes, we offer ground pegs to secure your branded gazebo to soft ground. We also have leg weights which can help to make sure your gazebo is stable on hard ground.

What other display products do your offer that work well with a branded gazebo?

We have a wide range of products which are ideal for using alongside our branded gazebos. Our range of feather flags are ideal for adding extra impact to your gazebo display. We also offer a bracket which is attached to the gazebo leg, allowing you to fly your feather flag from your gazebo. We also have a range of freestanding banners which are ideal for using with our branded gazebos, including our versatile Y band outdoor banners. The Y band banner comes with a water fillable base, making sure they are sturdy for displaying externally.

Can I use more than one fully printed gazebo next to one another?

All of our printed gazebos can be displayed side by side. With your choice of wall numbers you have the freedom to use multiple gazebos alongside each other, fitting your display area.

Ask us about our new Pollutant eating coating which we can apply to your flags!

EnhanceAir®, Powered by PURETiTM Light-activated coating that destroys air pollution.

When applied to outdoor advertising media, EnhanceAir turns any treated material into an air purifying surface that not only enhances human health, but contributes to the fight against global warming.

  • The coating is transparent and does not impact the appearance or durability of the ad itself.
  • Typically applied as the last step in the printing process.
  • No changes are required in the installation process.
  • It does not affect the recyclability of the material.


When UVA light energy activates the coating, it starts a chemical process that turns nearby oxygen and water vapor into two powerful cleaning agents (OH-* and O2-*)

• These two cleaning agents convert pollutants into harmless minerals and gasses.

• The active mineral is a catalyst, so it is not consumed in the process. It continues to work as long as it is on the surface and has access to humidity and light.

• The process happens only at the surface and repeats constantly to clean the surface and the air that comes in contact with it.

Why NOx?

Nitrogen oxides (NO and NO2) are formed during combustion. NOx is harmful in several ways:

• It irritates airways and increases susceptibility to allergens.

• It combines with other pollutants in the air to create smog, acid rain, PM2.5 and ground level ozone, which contributes to global warming.

• Increases risk of heart disease, stroke, COPD, and lung cancer.

• It has a much higher Global Warming Potential than CO2.


NOx is an indirect greenhouse gas. It does not trap heat directly, but leads to the creation of other gases, like ozone, that are greenhouse gases. It is included on the list of gases that countries report in their greenhouse gas inventories.


EnhanceAir fights climate change and improves human health by destroying NOx and other pollutants. It helps lower the greenhouse gas footprint, but not the carbon footprint.

Proven Laboratory and Real World Results

Using a test based on the ISO 22197-1 standard, we pass a fixed amount of NOx across a treated surface where the air is in contact with the surface for only 1 second on average before being replaced by new polluted air at the same concentration. The concentration of NOx is measured as it exits the chamber.

To help us process your artwork and orders efficiently please ensure your artworks meet the following requirements:


  • The artwork has been placed on the correct template, which will be sent to you.
  • All important images, text or logos are placed within the safe zone of the template.
  • The image quality is at 100% and is not pixilated or blurred.
  • No crop marks or registration marks have been included in the artwork.
  • The orientation of the artwork is correct and all of the artwork elements are in the correct positions, e.g. logos, texts and images.
  • No notes, descriptions or annotations have been left in the PDF file.
  • All of your artwork is saved in the Your Artwork layer and the INFO layer has been deleted before sending your finished artwork to us.
  • Your artwork has been provided in a PDF format.

These requirements are designed to help you provide artwork ready to process. Providing artwork in ready to process will help to speed up your order time.

However, if you are unable to provide artwork in this format we do offer an artwork support service, which will be able to handle most types of artwork.

Please note that we only offer UK delivery through our webshop.


For stock items and flagpoles we offer a 3 working day lead time and a 3 working day standard delivery time. We will always endeavour to send orders out as soon as possible.


For most digitally printed products we work with a 7 to 10 working day lead time. These times may vary and are not guaranteed. For larger products such as Gazebos, these have a 12+ working day lead time. All lead times are from artwork sign off.


If you have specific lead time requirements or would like more information on our current lead times, please don't hesitate to contact us. We aim to meet all our customers deadline dates (some tighter lead times may be subject to an express fee).


Next day delivery is not available for remote areas, Channel Islands, Ireland, Northern Ireland, Isle of Man, Isles of Scilly, Highlands or the Scottish Isles.



We cannot accept returns of any of our bespoke products. All our products are quality checked before being dispatched. If you receive your products and they are substantially incorrect, please contact us within 3 days of delivery.


Stock items can be returned to us in their original packaging and unused, within 14 days of receiving your goods. The return cost will not be covered by House of Flags.

Write Your Own Review
You're reviewing:Printed Gazebos
Your Rating
Artwork Templates
(Size: 404.2 KB) Downloads: 140
(Size: 398.7 KB) Downloads: 139
(Size: 395.4 KB) Downloads: 135
(Size: 401.7 KB) Downloads: 120
(Size: 389.5 KB) Downloads: 168
(Size: 385.7 KB) Downloads: 142
(Size: 390 KB) Downloads: 143
(Size: 385.3 KB) Downloads: 136
(Size: 387 KB) Downloads: 146
(Size: 386 KB) Downloads: 156
Product Information
(Size: 326.1 KB) Downloads: 37
Recently Viewed
No recently views items
Clear All
Printed Gazebos
Copyright © House Of Flags 2021 | VAT Number – GB705861825 | Company Number – 2213723